Gestetner 1045 User Manual page 12

Transmission Features
D
If you select a document with a
password, enter the password.
If the document does not have a
password, proceed to step F.
E
4
Press [OK].
F
When you want to add your origi-
nals to the stored documents and
send them all at once, press [R
Origi. + Stored File] or [Stored file + R
Origi.].
When sending only the stored doc-
uments, go to step G.
Note
❒ When the [R Origi. + Stored File]
key is pressed, the machine
sends in the order of "Originals"
to "Stored Files". When the
[Stored file + R Origi.] key is
pressed, the machine sends in
the order of "Stored Files" to
"Originals".
❒ The added originals are not
stored.
62
G
Press [OK].
Note
❒ To add an original to the stored
documents, place the original
and select any scan settings you
require.
H
Dial and press the { { { { Start} } } } key.
Printing Stored Documents
Use this feature to print the docu-
ments stored in the document server.
Limitation
❒ Only the documents that are
stored using the fax feature can be
R
R R
printed. Documents stored using
R
R R
the fax feature are shown with an
"F" in front. To print documents
that are stored using the copy fea-
ture or printer feature, press the
{Document Server} key. See the
Copy Reference and Printer refer-
ence for details.
Reference
⇒ "Document Server" in the Copy
Reference manual
Note
❒ You can also print the first page
only to check the content of the
original.
❒ You can specify and print multiple
documents.
❒ When specifying and printing
multiple documents, page num-
bers are put on all the files. You can
specify whether to put page num-
bers on your files in "User Parame-
ters". The factory default is set to
"Print".⇒ P.136 "Changing the User
Parameters"(Switch18, Bit3)