Gestetner 1045 User Manual page 18

Transmission Features
D
Press [ON] or [OFF] to specify "Fax
Header Print".
Note
❒ The factory default is set to on.
4
❒ You can select "Own Number 1"
or "Own Number 2". Contact
your service representative for
details.
❒ To close option settings, go to
step J.
E
Press [Programed name] or [OFF] to
specify "Label Insertion".
Note
❒ The factory default is set to on.
❒ To close option settings, go to
step J.
68
F
Change "Sender Stamp".
Note
❒ The factory default is set to "No
Stamp".
❒ To close option settings, go to
step J.
A Press [Change].
B Enter user name to be stamped.
Note
❒ User name specified when
the User Code is programed
appears.
❒ Press [Non-programed Name] to
stamp a user name which is
not programed.
C Press [OK].