Wireless Network - D-Link DIR-615 User Manual

Section 4 - Configuration
From this page you can configure your wireless network settings. There
are two tabs for 2.4 GHz and 5 GHz. 802.11n/g/b operate on 2.4 GHz, while
802.11ac/n/a operates over 5 GHz. 2.4 GHz and 5 GHz networks are configured
independently.
General Settings
Enable Wireless:
Toggle this switch to enable wireless access.
Wireless mode: Select a wireless mode from the list.
Select channel Toggle this switch to enable to allow the router to automatically select
automatically: an operating channel.
Enable additional Toggle this switch to enable higher channels on the 5 GHz band.
channels: Note: This feature is only supported over 5 GHz.
Channel: If Select channel automatically is disabled, select the channel your
router will use.
Enable periodic Toggle this switch to periodically scan for an optimal channel.
scanning:
Scanning period: If Enable periodic scanning is enabled, specify the amount of time
in seconds between scans.
Wi-Fi Network
Network name Specify the desire SSID for your wireless network. All devices must
(SSID):
connect to this SSID.
Hide SSID: Toggle this switch to prevent SSID broadcasting. Clients will still need
to enter the correct SSID to connect to your network.
D-Link DIR-615 User Manual

Wireless network

60