Table of Contents
Advertisement
Section 4 - Configuration
From this page you can configure your wireless network settings.
General Settings
Enable Wireless:
Toggle this switch to enable wireless access.
Wireless mode:
Select a wireless mode from the list.
Select channel
Toggle this switch to enable to allow the router to automatically select
automatically:
an operating channel.
Enable additional
Toggle this switch to enable higher channels on the 5 GHz band.
channels:
Note: This feature is only supported over 5 GHz.
If Select channel automatically is disabled, select the channel your
Channel:
router will use. If Select channel automatically is enabled, push the
Refresh button to start auto channel selection algorith.
Enable periodic
Toggle this switch to periodically scan for an optimal channel.
scanning:
Scanning period:
If Enable periodic scanning is enabled, specify the amount of time
in seconds between scans.
Wi-Fi Network
Network name
Specify the desire SSID for your wireless network. All devices must
(SSID):
connect to this SSID.
Hide SSID:
Toggle this switch to prevent SSID broadcasting. Clients will still need
to enter the correct SSID to connect to your network.
D-Link DIR-615+ User Manual
Wireless network
60
Advertisement
Table of Contents
