D-Link DIR-615 User Manual page 46

Section 4 - Configuration
Select PPPoE Dual Stack if your ISP provides and requires you to enter
a PPPoE username and password in order to connect to the Internet and
supports adding IPv6 access to PPP for IPv4. Choose Basic configuration or All
Settings.
Basic
MAC address:
The default MAC address is set to the Internet port's physical interface
MAC address on the router. You can edit that address manually here.
Clone MAC
Toggle this switch to clone the MAC address of the device you are
address of your
using to access the web UI. Note that no two MAC address within the
NIC:
same subnet can be the same.
Restore Default
Click here to restore your router's default MAC address.
MAC Address:
Without Enable this setting to connect without a username and password.
authorization:
This configuration is uncommon and is disabled by default.
Username: If Without authorization is disabled, specify the PPP username
provided by your ISP.
Password: If Without authorization is disabled, specify the PPP password
provided by your ISP.
Service name: Specify the ISP service name (optional).
Get IPv6: Choose Automatically, IPv6 by DHCPv6, by SLAAC, or DHCPv6 PD
according to the type of IPv6 is used by your ISP. The default setting
is Automatically.
Click Apply when you are done.
D-Link DIR-615 User Manual
PPPoE Dual Stack
42