D-Link DIR-615 User Manual page 65

Section 4 - Configuration
Max Associated Specify the maximum number of clients that can be connected at one
Clients:
time. Enter 0 for unlimited clients. The default setting is 0.
Enable shaping: Toggle this switch to enable shaping. This setting is disabled by
default.
If Enable shaping is set to enable, specify the shaping threshold in
Shaping (MBits/s):
Mbits/second.
Broadcast wireless Toggle this switch to disable broadcasting of a wireless network. This
network:
is useful if the router is being configured as a Wi-Fi client. This setting
is enabled by default.
Clients isolation:
Toggle this switch to prevent Wi-Fi clients from interacting with each
other.
Security Settings
Network Select Open, WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK mixed,
authentication: WPA, WPA2, or WPA/WPA2 mixed. The default and recommended
setting is WPA2-PSK.
If you have selected WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed:
Password: Specify a wireless password. Each device connecting to your network
must enter this password.
Encryption type:
Select an encryption type.
D-Link DIR-615 User Manual
Wireless network (cont)
61