Network; Ipv4 - D-Link DIR-615 User Manual

Wireless n 300 router

Hide thumbs Also See for DIR-615:

Table of Contents

Section 4 - Configuration

This section will allow you to change the local network settings of the router

and to configure the DHCP settings. In the Settings menu on the bar on

the top of the page, click Network. Click IPv4 and IPv6 to configure their

respective settings.

Local IP Address

IP Address:

Specify the IP address of the router. The default IP address is

192.168.0.1.

If you change the IP address, once you click Apply you will need to

enter the new IP address in your browser to access the configuration

utility.

Mask:

Specify the subnet mask of the router. The default subnet mask is

255.255.255.0.

Gateway IP

For Access Point, Repeater, and Client modes only.

Address:

Specify the gateway IP address which is used by the router to connect

to the internet. (Optional)

Hostname:

Specify the device domain name and URL to access the management

utility. The default URL is http://dlinkrouter.local/

Dynamic IP Addresses

Mode of Dynamic

Select Disable, DHCP server, or DHCP relay. The default setting is

IP address

DHCP server

assignment:

D-Link DIR-615 User Manual

Network

Table of Contents