Configuring Wireless Network - D-Link DIR-615 User Manual

DIR-615 Wireless N300 Router
User Manual

Configuring Wireless Network

This configuration step is available for the Router, Access point, WISP Repeater, and
Repeater modes.
1. On the Wireless Network 2.4 GHz page, in the Network name field, specify your own
name for the wireless network or leave the value suggested by the router.
2. In the Password field, specify your own password for access to the wireless network or
leave the value suggested by the router (WPS PIN of the device, see the barcode label).
3. You can restore the parameters of the wireless network specified before resetting to factory
defaults. To do this, click the RESTORE button.
4. If you want to create an additional wireless network isolated from your LAN, select the
Enable guest network checkbox (available for the Router and WISP Repeater modes
only).
5. In the Network name field, specify your own name for the guest wireless network or leave
the value suggested by the router.
6. If you want to create a password for access to the guest wireless network, deselect the Open
network checkbox and fill in the Password field.
Figure 39. The page for configuring the wireless network.
Figure 40. The page for configuring the wireless network.
Page 49 of 184
Configuring via Web-based Interface