D-Link DIR-615 User Manual page 37

Section 4 - Configuration
Select PPPoE if your ISP provides and requires you to enter a PPPoE username
and password in order to connect to the Internet. Choose Basic configuration
or All Settings.
Basic
MAC address:
The default MAC address is set to the Internet port's physical interface
MAC address on the router. You can edit that address manually here.
Clone MAC
Toggle this switch to clone the MAC address of the device you are
address of your
using to access the web UI. Note that no two MAC address within the
NIC:
same subnet can be the same.
Restore Default
Click here to restore your router's default MAC address.
MAC Address:
Without Enable this setting to connect without a username and password.
authorization:
This configuration is uncommon and is disabled by default.
If Without authorization is disabled, specify the PPP username
Username:
provided by your ISP.
Password: If Without authorization is disabled, specify the PPP password
provided by your ISP.
Service name:
Specify the ISP service name (optional).
Click Apply when you are done.
D-Link DIR-615 User Manual
PPPoE
33