Onkyo TX-RZ820 Basic Manual page 61

> Specifications > Advanced Setup
when the network feature is started.
■ 5� 12V Trigger
Setting Item Default Value
Zone Main
> Listening Modes
Setting Details
Set which zone to output the 12V trigger when
playing. If you select "All", then the 12V trigger is
output to all zones that are playing.
> Network Functions
6� Multi Zone
Make settings related to Multi-zone Connection, such as the volume for the separate room.
■ 1� Zone 2
Setting Item Default Value
Output Level Fixed
Maximum Volume Off
Power On Volume Last
■ 2� Zone 3
Setting Item Default Value
Output Level Fixed
Maximum Volume Off
> Basic Manual
Troubleshooting Supplementary Information, etc� |
Setting Details
Select whether to adjust the volume on the pre-
main amplifier in the separate room or on this unit
when outputting to Zone 2.
"Fixed": Adjust on the pre-main amplifier in the
separate room
"Variable": Adjust on this unit
Set the maximum value for Zone 2 to avoid too
high volume. Select a value from "Off", "50" to
"99". (When "3. Audio Adjust" - "Volume" - "Volume
Display" is set to "Absolute")
Set the Zone 2 volume level of when this unit is
turned on. Select a value from "Last" (Volume level
when the unit was turned off), "Min", "0.5" to "99.5"
and "Max". (When "3. Audio Adjust" - "Volume" -
"Volume Display" is set to "Absolute")
• You cannot set a higher value than that of
"Maximum Volume".
Setting Details
Select whether to adjust the volume on the pre-
main amplifier in the separate room or on this unit
when outputting to Zone 3.
"Fixed": Adjust on the pre-main amplifier in the
separate room
"Variable": Adjust on this unit
Set the maximum value for Zone 3 to avoid too
high volume. Select a value from "Off", "50" to
"99". (When "3. Audio Adjust" - "Volume" - "Volume
Display" is set to "Absolute")
25