Onkyo TX-RZ820 Basic Manual page 44

Hide thumbs Also See for TX-RZ820:
Table of Contents

Advertisement

> Specifications
> Advanced Setup
Setting Item
Default Value
Zone 2 HDMI
Not Use
OSD Language
English
Impose OSD
On
8
> Listening Modes
Setting Details
Make the setting when you output to the Zone 2 TV
connected to the HDMI OUT ZONE 2/SUB jack.
"Use": Enable this function
"Not Use": Disable this function
Select the on-screen display language from the
following.
(North American models) English, German, French,
Spanish, Italian, Dutch, Swedish
(European and Asian models) English, German,
French, Spanish, Italian, Dutch, Swedish, Russian,
Chinese
Set whether or not to display the information on
the TV when the volume is adjusted or input is
changed, for example.
"On": OSD displayed on the TV.
"Off": OSD not displayed on the TV.
• OSD may not be displayed depending on the
input signal even if "On" is selected. If the
operation screen is not displayed, change the
resolution of the connected device.
> Network Functions
Setting Item
Default Value
Setting Details
Mini Player OSD
Always On
You can play on the TV the images from another
input selected immediately prior while you are
playing the audio from NET or BLUETOOTH input.
After switching to NET or BLUETOOTH, play the
images and audio, then when you press MODE
on the remote controller, the image is displayed in
full-screen mode, and the audio information (Mini
Player) for NET or BLUETOOTH is displayed in
the corner of the screen. You can set whether to
display this Mini Player on the screen all the time.
"Always On": The Mini Player is displayed all the
time.
"Auto Off": The Mini Player turns off automatically
30 seconds after being displayed. It is displayed for
30 seconds after operations such as changing the
volume.
Screen Saver
3 minutes
Set the time to start the screen saver.
Select a value from "3 minutes", "5 minutes", "10
minutes" and "Off".
> Basic Manual
Troubleshooting Supplementary Information, etc�
|
• Each press of the MODE button displays or
turns off the video.
• This cannot be selected if "Impose OSD" is set
to "Off".

Advertisement

Table of Contents
loading

Table of Contents