Onkyo TX-RZ820 Basic Manual page 47

> Specifications > Advanced Setup
■ 5� Analog Audio Input
You can change input assignment between the input selectors and AUDIO IN jacks. If you
do not assign a jack, select "---".
Setting Item Default Value
BD/DVD AUDIO 1
CBL/SAT AUDIO 2
GAME AUDIO 3
STRM BOX AUDIO 4
PC ---
CD AUDIO 5
TV AUDIO 6
PHONO PHONO
> Listening Modes
Setting Details
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the BD/DVD button.
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the CBL/SAT button.
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the GAME button.
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the STRM BOX button.
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the PC button.
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the CD button.
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the TV button.
The setting cannot be changed.
> Network Functions
2� Speaker
You can make changes to the connection environment of the speakers and change the
volume level. Settings are automatically configured if you use AccuEQ Room Calibration.
This setting cannot be selected if headphones are connected or audio is output from the
speakers of the TV.
■ 1� Configuration
Setting Item Default Value
Speaker 7.1.2 ch
Channels
Subwoofer Yes
Height Speaker Top Middle
> Basic Manual
Troubleshooting Supplementary Information, etc� |
Setting Details
Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1 ch",
"7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", "5.1.2
ch", "6.1.2 ch" or "7.1.2 ch" to suit the number of
speaker channels connected.
• You can connect both surround back speakers
and height speakers if you select "6.1.2 ch"
or "7.1.2 ch". However, you can only output
audio from one of these at a time. When both
are connected, you can set which speakers
to prioritize in "Other" - "Speaker Layout", in
"Quick Menu".
Set whether a subwoofer is connected or not.
"Yes": When subwoofer is connected
"No": When subwoofer is not connected
Set the speaker type if height speakers are
connected to the HEIGHT terminals.
Select "Front High", "Top Front", "Top Middle",
"Top Rear", "Rear High", "Dolby Speaker (Front)",
"Dolby Speaker (Surr)" or "Dolby Speaker (Back)"
according to the type and layout of the connected
speakers.
• If an item cannot be selected even though
connection is correct, check that the settings
in "Speaker Channels" matches the number of
connected channels.
11