Playback; Basic Playback Procedure; Selecting An Hdmi Output Jack - Yamaha Aventage MusicCast RX-A1070BL Owner's Manual

AV
1 2 3 4
5 6 7 V-AUX
AUDIO
Input selection keys
1 2 3 PHONO
TUNER BLUETOOTH USB NET
MAIN MAIN ZONE 2 ZONE 2 PARTY PARTY HDMI OUT
HDMI OUT
SCENE SCENE
1 1 2 2 3 3 4 4
MUTE
MUTE VOLUME
PROGRAM PROGRAM VOLUME
ON SCREEN
TOP MENU TOP MENU POP-UP/MENU POP-UP/MENU
ON
SCREEN OPTION OPTION
Cursor keys
ENTER
ENTER
RETURN RETURN DISPLAY DISPLAY
BAND BAND
MODE MODE
TUNING TUNING PRESET PRESET
SUR. DECODE STRAIGHT SUR. DECODE STRAIGHT
MOVIE MOVIE MUSIC MUSIC
ENHANCER PURE DIRECT ENHANCER PURE DIRECT
INFO INFO SLEEP SLEEP
1 1 2 2 3 3 4 4
5 5 6 6 7 7 8 8
9 9 0 0 MEMORY MEMORY ENT ENT

PLAYBACK

Basic playback procedure

1
Turn on the external devices (such as a TV or BD/DVD
player) connected to the unit.
2
Use the input selection keys to select an input source.
3
Start playback on the external device or select a radio
station.
Refer to the instruction manual for the external device.
For details on the following operations, see the corresponding
pages.
• Listening to FM/AM radio (except Australia, U.K., Europe and
Russia models) (p.69)
• Listening to DAB radio (Australia, U.K., Europe and Russia models
only) (p.72)
• Listening to FM radio (Australia, U.K., Europe and Russia models
only) (p.76)
• Playing back music via Bluetooth (p.80)
• Playing back music stored on a USB storage device (p.82)
• Playing back music stored on media servers (PCs/NAS) (p.85)
• Listening to Internet radio (p.89)
• Playing back iTunes/iPod music with AirPlay (p.92)
4
Press VOLUME to adjust the volume.
X
• To mute the audio output, press MUTE. Press MUTE again to unmute.
• To adjust the treble/bass settings, use the "Option" menu or TONE CONTROL
on the front panel (p.107).
On-screen input selection
a Press ON SCREEN.
b Use the cursor keys to select "Input" and press ENTER.
c Use the cursor keys to select the desired input source and press
ENTER.

Selecting an HDMI output jack

1
Press HDMI OUT to select an HDMI OUT jack.
Each time you press the key, the HDMI OUT jack to be used for
signal output changes.
OUT 1+2
OUT 1
OUT 2
Off
X
• You can also select an HDMI output jack by selecting a scene (p.61).
• When "OUT 1+2" is selected, the unit outputs video signals at the highest resolution
supported by both TVs (or projectors) connected to the unit. (For example, if you have
connected a 1080p TV to the HDMI OUT 1 jack and a 720p TV to the HDMI OUT 2 jack,
the unit outputs 720p video signals.)
• If the HDMI OUT 2 jack is assigned to Zone2 (p.136), you can turn on/off each zone by
pressing HDMI OUT repeatedly.
60
En
HDMI OUT Sel.
VOL.
OUT 1+2
L C R
SL SW SR
SBL SBR
Outputs the same signal at both the HDMI OUT 1 and
HDMI OUT 2 jacks.
Output the signals at the selected HDMI OUT jack.
Does not output the signals at the HDMI OUT jacks.