Connecting Audio Devices (Such As Cd Players) - Yamaha Aventage MusicCast RX-A1070BL Owner's Manual

Connecting audio devices (such as CD players)

Connect audio devices such as CD players and a turntable to the unit. Depending on the audio
output jacks available on your audio device, choose one of the following connections.
Y
The following explanation is based on the assumption that you have not changed the "Input Assignment" setting
(p.137) in the "Setup" menu. As necessary, you can assign the COAXIAL (3, 4, 5) and OPTICAL (1, 2, 6) jacks
to another input source.
X
If you make more than one audio connection for one input source, an audio signal played back on the unit will be
determined according to the "Audio Select" setting (p.109) in the "Option" menu.
Audio output jacks on audio device
Digital coaxial
Digital optical
Analog stereo
Turntable (PHONO)
Audio input jacks on the unit
AV 1-2 (COAXIAL)
AUDIO 3 (COAXIAL)
AV 3 (OPTICAL)
AUDIO 1-2 (OPTICAL)
AV 1-4 (AUDIO)
AUDIO 1-3 (AUDIO)
PHONO
PHONO jacks
PHONO
L
R
GND
HDMI OUT
(HDCP2.2)
2 1 AV 1
(ZONE OUT) ARC (1 BD/DVD)
AV 1 AV 2 AV 3 AV 4 COMPONENT VIDEO
(1 BD/DVD) AV 1
Y
A
VIDEO
B
Y AV 2
PHONO AUDIO 1 AUDIO 2 AUDIO 3
(2 TV)
ZONE OUT
L L
R R
ZONE 2
GND 1 OPTICAL 2 OPTICAL 3 COAXIAL 4 COAXIAL 5 COAXIAL 6 OPTICAL
R SURROUND
ANTENNA
(4 RADIO)
FM AM
75
The unit
(rear)
Any of AV 1-4, AUDIO 1-3
(COAXIAL, OPTICAL, AUDIO) jacks
If you select the input source by pressing AV 1-4, AUDIO 1-3 or PHONO on the remote control,
the audio played back on the audio device will be output from the unit.
When connecting a turntable
• The PHONO jack of the unit is compatible with an MM cartridge. To connect a turntable with a
low-output MC cartridge, use a boosting transformer.
• Connecting the turntable to the GND terminal of the unit may reduce noise in the signal.
36
En
Audio output
(PHONO)
PHONO
L
R
Ground lead
GND
AV 2
P P
B R
P B P R
FRONT
L
COAXIAL
OPTICAL
L
R
Audio output
(any of digital coaxial, digital optical,
analog stereo)
Turntable
Audio device