Table of Contents
Advertisement
1
Connecting speakers
The unit has 7 built-in amplifiers. You can connect 2 to 9 speakers and up to 2 subwoofers to create the favorite acoustic space in your room.
You can also apply bi-amp connections, channel expansion (using an external power amplifier) or multi-zone configurations to enhance your system (p.26).
Caution
Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit's speaker impedance to "6 Ω MIN". In this case, you can also use 4-ohm speakers as the front speakers.
For details, see "Setting the speaker impedance" (p.23).
Ideal speaker layout
E
0.5 to 1 m
(1.6 to 3.3 ft)
1.8 m
(5.9 ft)
1
9
4
10°~30°
6
0.3 m (1 ft) or more
R
0.5 to 1 m
(1.6 to 3.3 ft)
1.8 m
2
(5.9 ft)
3
9
5
10°~30°
7
Functions of each speaker
Speaker type
Front (L/R)
Produce front left/right channel sounds (stereo sounds).
1 2
Center 3
Produces center channel sounds (such as movie dialogues and vocals).
Surround (L/R)
Produce surround left/right channel sounds. Surround speakers also produce
4 5
surround back channel sounds when no surround back speakers are connected.
Surround back (L/R)
Produce surround back left/right channel sounds.
6 7
Front presence (L/R)
Produce CINEMA DSP effect sounds or heights channel sounds of Dolby Atmos
E R
and DTS:X contents.
Produces LFE (low-frequency effect) channel sounds and reinforces bass parts of
other channels.
Subwoofer 9
This channel is counted as "0.1". You can connect 2 subwoofers to the unit and
place them on the left/right (or front/rear) sides of the room.
X
• We recommend using front presence speakers to have a full effect of the 3-dimensional sound fields. However,
the unit creates Virtual Presence Speaker (VPS) using the front, center and surround speakers to produce
3-dimensional sound fields even when no front presence speakers are connected (p.64).
• Use "Ideal speaker layout" (diagram on the right) as reference. You do not need to exactly adjust the speaker
layout to this diagram since the YPAO function of the unit will automatically optimize the speaker settings (such
as distances) to suit the speaker layout.
• When using only one surround back speaker, place it straight behind the listening position (middle of "SBL"
and "SBR" in the diagram).
17
En
Function
Advertisement
Table of Contents
