Yamaha Aventage MusicCast RX-A1070BL Owner's Manual page 54

z
AV AV
1 1 2 2 3 3 4 4
5 5 6 6 7 7 V-AUX V-AUX
AUDIO AUDIO
1 1 2 2 3 3 PHONO PHONO
TUNER TUNER BLUETOOTH BLUETOOTH USB USB NET NET
MAIN MAIN ZONE 2 ZONE 2 PARTY PARTY HDMI OUT HDMI OUT
SCENE SCENE
1 1 2 2 3 3 4 4
MUTE MUTE
PROGRAM PROGRAM VOLUME VOLUME
ON SCREEN
TOP MENU TOP MENU POP-UP/MENU POP-UP/MENU
ON
SCREEN OPTION OPTION
Cursor keys
ENTER
ENTER
RETURN RETURN DISPLAY DISPLAY
BAND BAND
MODE MODE
TUNING TUNING PRESET PRESET
SUR. DECODE STRAIGHT SUR. DECODE STRAIGHT
MOVIE MOVIE MUSIC MUSIC
ENHANCER PURE DIRECT ENHANCER PURE DIRECT
INFO INFO SLEEP SLEEP
1 1 2 2 3 3 4 4
5 5 6 6 7 7 8 8
9 9 0 0 MEMORY MEMORY ENT ENT
■ Using other connection methods
If your wireless router (access point) does not support WPS push button
configuration method, follow the procedure below to configure the
wireless network settings.
1
Press z (receiver power) to turn on the unit.
2
Turn on the TV and switch the TV input to display video
from the unit (HDMI OUT jack).
Y
Operations with TV screen are available only when your TV is connected to the
unit via HDMI.
3
Press ON SCREEN.
4
Use the cursor keys to select "Setup" and press ENTER.
5
Use the cursor keys (e/r) to select "Network".
6
Use the cursor keys (q/w) to select "Network
Connection" and press ENTER.
7
Use the cursor keys (q/w) and ENTER to check "Wireless
(Wi-Fi)" and select "OK".
X
The checkmark indicates the current setting.
8
Use the cursor keys (q/w) and ENTER to select the
desired connection method and select "NEXT".
The following connection methods are available.
WPS Button
Share Wi-Fi
Settings (iOS)
Access Point Scan
Manual Setting
PIN Code
54
En
You can set up a wireless connection with the WPS button
while viewing the TV screen. Follow the instructions
displayed on the TV screen.
See "Sharing the iOS device setting" (p.52).
You can set up a wireless connection by searching for an
access point. For details on settings, see "Searching for an
access point" (p.55).
You can set up a wireless connection by entering the
required information (such as SSID) manually.
For details on settings, see "Setting up the wireless
connection manually" (p.55).
You can set up a wireless connection by entering the unit's
PIN code into the wireless router (access point). The
method is available if the wireless router (access point)
supports the WPS PIN code method. For details on settings,
see "Using the PIN code" (p.56).