3000 And Ato Wiring Harnesses - Frymaster FootPrint OCF30G Service & Parts Manual

2.6.2 3000 and ATO Wiring Harnesses

ITEM PART #
* 807-4546
* 807-4646
* 807-4655
* 826-2569
* 807-4553
* 807-5163
* 807-4719
* 807-5161
* 807-5162
* 807-4573
* 807-4552
807-4657
* 106-9544
√ * 807-4660PK
√ * 230-2345
* Not illustrated.
√ Recommended parts.
See page 1-30 and 1-39 for Pin Positions.
(Refer to wiring diagram on page 1-50.)
Controller Communication (used from controller to controller)
Controller Communication (used from right controller to ATO box)
Harness RTD Medium (used from ATO RTD to ATO Board)
FV/DV ATO/RTD Probe Kit
ATO Power (used from transformer to ATO board #1)
ATO Power ATO Secondary Box (used from transformer to ATO board #2)
ATO Pump and JIB (used from ATO Board to Top-off Pump and JIB Reset
Switch)
Harness, ATO Solenoid, Pump Relay Primary (used from ATO Board to Top-off
Pump Relay, Solenoids, and JIB Reset Switch)
Harness, Secondary ATO Solenoid, Pump Relay (used in second ATO box on 4
battery fryers from ATO Board to Top-off Pump Relay and Solenoids)
Controller Locator Wire (used from controller to interface board) See wiring dia-
gram 805-1855 on page 1-51 for locator pin positions.
Communications Terminator (used on controller pin J6 and ATO board pin J10 to
terminate network)
Jumper (used on 4 and 5 battery ATO board plug J5 pin 7 and 8)
Long Top-off Power (used between ATO box #1 and #2)
SMT Pin Service Repair Kit
SMT Pin Extractor
2-13
COMPONENT