Cm7 And Ato Wiring Harnesses - Frymaster FOOTPRINT 8196345 Service & Parts Manual

2.6.2 CM7 and ATO Wiring Harnesses

ITEM PART #
* 807-4546
* 807-4655
* 807-4654
* 807-4553
* 807-4719
* 807-4718
* 807-4555
* 807-4573
* 807-4552
807-4657
* 106-9256SP
* 807-4660PK
* 230-2345
* Not illustrated.
See page 1-31 and 1-37 for Pin Positions.
(Refer to wiring diagram on page 1-49.)
Computer Communication (used from Computer to Computer)
FV Harness RTD Medium (used from RTD to ATO Board)
FV ATO/RTD Probe
ATO Power (used from Transformer to ATO Board)
ATO Pump and JIB (used from ATO Board to Top-off Pump and JIB Reset
Switch)
FV ATO Solenoid Harness
ATO Yellow LED (used from ATO Board to Yellow LED)
Computer Locator Wire (used from Computer to Interface Board) See wiring
diagram 805-1734 for locator pin positions.
Communications Terminator (used on Computer pin J6 and ATO board pin
J10 to terminate network)
Jumper (used on 4 and 5 battery ATO board plug J5 pin 7 and 8)
Long Top-off Power (used between Component Box to ATO Box)
SMT Pin Service Repair Kit
SMT Pin Extractor
2-13
COMPONENT