Basket Lift Harness; Interface Board To Controller Wiring Harness 15-Pin; 3000 And Ato Wiring Harnesses - Frymaster OCF30 Service & Parts Manual

2.5.8.8 Basket Lift Harness

2.5.8.9 Interface Board to Controller Wiring Harness – 15-Pin

2.5.8.10 3000 and ATO Wiring Harnesses

ITEM PART #
* 807-4546
* 807-4655
* 826-2569
* 807-4553
* 807-5161
* 807-5162
* 807-4573
* 807-4552
807-4657
* 106-9256SP
* 807-4646
√ * 807-4660PK
√ * 230-2345
* Not illustrated.
√ Recommended parts.
See page 1-17 and 1-25 for Pin Positions.
PN 807-4199
SMT Controller to Interface
Board Wiring Harness
Controller Communication (used from Controller to Controller)
Harness ATO RTD Extension (used from ATO RTD to ATO Board)
ATO FV/DV RTD Probe Kit
Harness, ATO Power (used from Transformer to ATO Board)
Harness, ATO Solenoid, Pump Relay (used from ATO Board to Top-off Pump
Relay, Solenoids, and JIB Reset Switch)
Harness, ATO Solenoid, Pump Relay Secondary (used in second ATO box on
4 battery fryers from ATO Board to Top-off Pump Relay and Solenoids)
Controller Locator Wire (used from Controller to Interface Board) See wiring
diagram 805-1856 on page 1-31 for locator pin positions.
Communications Terminator (used on Controller pin J6 and ATO board pin
J10 to terminate network)
Jumper (used on 4 and 5 battery ATO board plug J5 pin 7 and 8)
Long Top-off Power (used between Component Box to ATO Box)
Harness, Communication Long (used from Far Right Controller to ATO
board)
SMT Pin Service Repair Kit
SMT Pin Extractor
2-20
COMPONENT