Table of Contents
Advertisement
Setup and Registration (System Menu) > System Menu
Item
IPv6 Setting
IPv6 Setting
Manual Settings
RA(Stateless)
DHCPv6 Settings
DNS Server
Restart Network
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/IP] is [On].
Select whether to use IPv6.
Value: Off, On
NOTE
Selecting [On] displays IP address in [Link Local] after restarting the network.
Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6).
Value
IP Address:
128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
Prefix Length:
0 to 128
Default Gateway: 128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
NOTE
This function is displayed when [IPv6 Setting] is set to [On].
To enter "Default Gateway", set [RA (Stateless)] to [Off].
Select whether to use RA (Stateless).
Value: Off, On
NOTE
This function is displayed when [IPv6 Setting] is set to [On].
Selecting [On] displays IP address in [IP Address 1 (to 5)] after restarting the network.
Select whether to use the DHCP (IPv6) server.
Value: Off, On
NOTE
This function is displayed when [IPv6 Setting] is set to [On].
Selecting [On] displays IP address in [IP Address] after restarting the network.
Set DNS server (IPv6).
Value: Auto (DHCP), Manual
NOTE
When [Manual] is selected, you can enter static DNS server information in the Primary and
Secondary fields provided.
Restarts the network.
8-16
Description
Advertisement
Table of Contents
Troubleshooting
