Playing An Audio Cd - Gateway Solo 5100 User Manual

Playing an Audio CD

Your notebook contains all the key features needed to enjoy your favorite audio
CDs.
1. Make sure the CD-ROM module is installed in the modular option bay.
Volume
wheel
2. Press the Eject button on the front of the CD-ROM module.
3. Gently pull the CD-ROM tray fully open and place the audio CD into the
tray.
4. Push in the CD-ROM tray until it closes completely.
5. After a few seconds, the CD-ROM will start playing automatically.
To play an audio CD
CD-ROM Eject
module button
CD-ROM manual
release — to eject
without power
Note:
Power (either battery or AC)
must be supplied to your
notebook before you can
open the CD-ROM tray.
Note:
If power is unavailable and
you need to remove a CD-
ROM disk, you may
manually eject the CD-
ROM tray using a thin
prodding device such as
the end of a paper clip
inserted into the CD-ROM
manual release hole.
Chapter 3: Using Your System 35