Powering Up Your Notebook - Gateway Solo 5100 User Manual

2. Plug the AC adapter into your notebook's power connector, located at the
back of your notebook near the right side.
3. Plug the power cord into an electrical outlet.

Powering up your notebook

Press in on the latch on the front face of your notebook to release the Liquid Crystal
Display (LCD) lid, and lift to open. To turn on your notebook, press the power
button, located in the upper right corner above the keyboard.
The power button on your system is preset in On/Off mode. However, you can set it
to function either in On/Off or Suspend/Resume mode using the setup screens (see
"Power menu" on page 57).
Do not attempt to
disassemble the AC
adapter. The AC adapter
has no user-replaceable or
user-serviceable parts
inside. The AC adapter
controls dangerous
voltages that can cause
serious personal injury or
death. Contact Gateway
about returning defective
AC adapters.
Power
button
Chapter 2: Getting Started
Warning!
13