Gateway Solo 5100 User Manual page 46

Gateway solo 5100: users guide

Hide thumbs Also See for Solo 5100:

Table of Contents

Using Your Solo 5100 Multimedia Notebook

Using the XJACK: Gently push on the end of the jack and release. The jack

will pop out. Plug an RJ-11 connector from above into the XJACK.

2. Insert the modem face up 68-pin connector first, into the PC Card slot in the

left rear side of the notebook. Press the modem gently, but firmly into the PC

Card slot until it will go no farther. Do not force the modem.

3. Plug the jack end of the modem cable into the wall jack. If you are using an

XJACK modem and need a longer cord for your modem, use an RJ-11

connector and extension telephone cable.

4. The modem is now enabled and ready to use.

Table of Contents