Swapping Modules - Gateway Solo 5100 User Manual

Swapping modules

The CD-ROM module can be exchanged for the floppy disk drive module in the
modular option bay. Each time you change them out, however, you must reboot
your system.
To switch between CD-ROM and floppy disk drive modules
1. Save all work, then follow your operating system's Shut Down procedure
to turn it off.
2. Close the cover and turn your notebook over.
3. Locate the modular bay access latch. Slide the latch open and use the grip
near the front of the notebook to pull the CD-ROM module out of the
notebook.
.
Note:
Be sure to save and exit
any applications before
initiating any of the
following procedures.
Chapter 3: Using Your System 31