Troubleshooting; When No Sound Is Output - Yamaha MG12XUK Owner's Manual

Troubleshooting

When No Sound Is Output

Refer to this section when no sound is output or the volume is very low. This information is for when sound is output from the
[STEREO OUT] jacks or the [PHONES] jack.
For details about these functions, see "Controls and Functions" on pages 12 – 16.
STEP 1 Connections and Signal Flow
Check if the instruments, microphones, and speakers are connected correctly, and if any of the cables are damaged.
When connecting guitars
or basses to the MG, use
DI boxes.
1
Signal is input
from a micro-
phone or
instrument.
2
Adjust tone and
level for each
channel.
3
18
MG12XUK Owner's Manual
DI
Route signals from channels to the master block.
[STEREO OUT] jacks
5
The signal is output to speakers
and/or headphones.
[PHONES] jack
4
Make final adjustments to the
level of the signal.