Specifications; Overall System Specifications; Atw-R5220/Atw-R5220Dan - Audio Technica 5000 Series User Manual

Uhf wireless systems
Table of Contents

Advertisement

Specifications

Overall system specifications

Operating frequencies
*1

ATW-R5220/ATW-R5220DAN

Band DG1:
Band DF1:
ATW-T5201/ATW-T5202
Band DE1:
Band EG1:
Band FE2:
Minimum frequency step
Modulation mode
Maximum deviation
Dynamic range
Total harmonic distortion
Operating range
*2
Frequency response
*3
*1 Note that some frequency bands might not be available in country or region in which you live, or could come with a limited tuning bandwidth/transmitting power due to local regulations.
*2 Open range environment with no interfering signals.
*3 Depending on attached microphone element.
ATW-R5220/ATW-R5220DAN
Receiving system
Image rejection
RF sensitivity
Maximum output level
Headphone output connector
Headphone output power
Antenna input
Antenna power
Power supply
Operating temperature range
Dimensions
Weight (without accessories)
Included accessories
Frequency range
470.125 to 699.875 MHz
470.125 to 607.875 MHz, 657.100 to 662.900 MHz
470.125 to 590.000 MHz
580.000 to 699.875 MHz
580.000 to 607.875 MHz, 657.100 to 662.900 MHz
25 kHz
FM
ATW-T5201: ±40 kHz (THD:10%)
ATW-T5202: ±40 kHz (THD:10%)
ATW-T5201 Mic input: 120 dB or higher (A-weighted), typical
ATW-T5201 Inst input: 107 dB or higher (A-weighted), typical
ATW-T5202: 116 dB or higher (A-weighted), typical
1.0 % or less (at 1 kHz, ±17.5 kHz deviation)
100 m (328')
ATW-T5201: 23 to 16,300 Hz
ATW-T5202: 33 to 16,300 Hz
True diversity
80 dB nominal
18 dBuV at 60 dBA S/N ratio (50 ohms termination)
XLR, Balanced, +18 dBV
6.3 mm (1/4") TRS Stereo
180 mW, typical
BNC-type, 50 ohms
12 V DC, 150 mA (combined)
100 to 240 V AC (50/60 Hz)
-5 ºC to +45 ºC (23 º F to 113 ºF)
482.0 mm (18.98") x 361.0 mm (14.21") x 43.0 (1.69") mm (W x D x H)
Approx. 4.8 kg (169.3 oz)
Flexible UHF antenna × 2, Power cable, leg × 4
33
Number of frequencies
9,191
5,511+233
4,796
4,796
1,116+223

Advertisement

Table of Contents
loading

Table of Contents