Setting The Energy-Saving Mode (Eco Mode) - Sony VPL-FHZ75 Operating Instructions Manual

One picture display
Two pictures display
(A) Main picture (B) Subpicture
You can select the image to project to the
main picture.
The subpicture is preset to source the signal
input from INPUT A. INPUT A is only
compatible with signals from computers.
Combinations of input signals
Main picture
INPUT B (DVI-D)
INPUT C (HDMI)
INPUT D (HDBaseT)
Notes
• When "Screen Aspect" (page 37) is set to
"4:3," the two picture function is not
available.
• When displaying two pictures, the input
signal icon does not appear in the input
select window (page 16).
• Picture settings set for one picture may not be
reflected as two pictures.
• When displaying two pictures, the ? (On) key,
1 (standby) key, INPUT key, and BLANK
key are available.
Setting the energy-saving
mode (ECO mode)
Energy-saving mode can be set easily.
Energy-saving mode consists of "With No
Input," "With Static Signal" and "Standby
Mode."
TWIN key
Subpicture
INPUT A (RGB)
1
Press the ECO MODE key to display
the ECO Mode menu.
ECO Mode
ECO
User
Sel
2
Press the V/v key or ECO MODE key
to select "ECO" or "User" mode.
ECO: Sets each mode to the optimum
energy-saving value.
-With No Input: Standby
-With Static Signal: Light Dimming
-Standby Mode: Low
User: Sets each item of the energy-
saving mode menu as you desire.
3
Press the RETURN key to restore the
previous image.
For details on ECO Mode settings, see "With
No Input," "With Static Signal," and
"Standby Mode" on the Connection/Power
menu (page 34).
Note
If you set "ECO Mode" to "ECO," or
"Standby Mode" (in "User") to "Low," the
network control function will be disabled in
standby mode. If the external control is
being performed by using the network or
network control function, do not select
"ECO," or do not set "Standby Mode" (in
"User") to "Low."
23
Back