Using The Mouse Mode Function (Vpl-Sw635C Only); Setting The Mouse Mode - Sony VPL-SW620 Operating Instructions Manual

Using the Mouse Mode Function
(VPL-SW635C only)
You can directly operate the Interactive Pen Device as a mouse on the screen by connecting the
projector and computer with a USB cable. You can directly operate the applications, etc. on the
computer screen.
Note
This is for the main pen only.
System Requirements
• OS: Windows 7/Windows 8/Windows 8.1

Setting the Mouse Mode

1
Connect the projector and the computer with a computer cable and USB cable
(page 45), and project the image with the projector.
For details regarding the connection of computer cables (Mini D-sub 15-pin cable or HDMI
cable) for image signals (VGA), see page 9.
2
Set "Whiteboard Data" to "Retrieve to computer" in "Interactive" on the Function
menu (page 26).
3
In "Assign Type B USB" (page 26), select the same input terminal as the one selected
in "Input" (a menu for switching input signal) on the screen (page 14) to select the
image for using mouse mode.
The settings of each item for the mouse mode usage are the following two methods (a and b).
PC Free
Interactive
a On
b Off
4
Perform the calibration.
Select "Auto" or "Manual (Main)" in "Calibration" of "Interactive" (page 26), or the
calibration icon on the toolbar of the PC Free Interactive function (page 52) to perform
calibration.
Note
For notes regarding usage of the Interactive Pen Device and performing calibration, see
page 52.
56

Using the Mouse Mode Function (VPL-SW635C only)

Selected input terminal on
Whiteboard
"Input" (menu for switching
Data
input signal)
Retrieve to "Input-A," "Input-B,"
computer "Input-C," "Type USB B," or
"Network"
Retrieve to "Input-A," "Input-B,"
computer "Input-C," "Type USB B," or
"Network"
Interactive
Assign Type B
Presentation
USB
Utility 2
Same as the Not activating
input terminal
selected on the
left
Same as the Not activating
input terminal
selected on the
left