Table of Contents
Advertisement
Setting items
Description
Color
On: Adjusts the hue, saturation, and brightness for the selected color. Repeat
Correction
steps 1 and 2 described below to specify the target color.
1 Press V/v to select "Color Select," then press B/b to select the color you
2 Press V/v to select "Hue," "Saturation" or "Brightness," then adjust them
Off: The "Color Correction" function is not applied.
Film
Auto: Precisely reproduces the image from a film source to suit the original
*6 *7
film source. Normally, select this option.
Mode
Off: Select this option if the images are rough around the edges when "Auto" is
selected.
Notes
*1: When "Intelligent Setting" is set to "On," "Picture Mode" cannot be set. Only "Custom" of
"Light Output Mode" in "Light Settings" is selectable and other items cannot be set.
*2: If you cannot find the appropriate option in "Location," select the closest one.
Usage location cannot be selected from "Location" for each input terminal.
*3: The projector may not be able to maintain the brightness in an environment with a lot of dust and
dirt.
*4: The display position of the status during the test works together with the "Menu Position" setting
(page 32).
*5: Available when a computer signal is input from the DVI-D input terminal (INPUT B), HDMI
input terminal (INPUT C), or HDBaseT input terminal (INPUT D). This projector is not to be
used as a device for medical diagnosis.
*6: When a video signal is input, this option is available.
*7: When a progressive signal is input, this option is not available.
want to adjust among "Red," "Yellow," "Green," "Cyan," "Blue," and
"Magenta."
to suit your taste using B/b while watching the projected picture.
27
Advertisement
Table of Contents
