Table of Contents
Advertisement
IP address. From the moment the IP
address is input, access will be allowed
only from that input IP address.
For security reasons, it is
recommended to input an IP address to
restrict access.
4
Click on [PJ Talk] to display the PJ
Talk page.
PJ Talk button
Start PJ Talk Service: Set PJ Talk to
enabled or disabled. Items for PJ Talk
are enabled only when this function is
enabled.
-Community: Input the community
name of Advertisement and PJ Talk. If
the community name for PJ Talk is
changed, the one for Advertisement
will also be changed. Only four
alphanumeric characters can be input.
The factory default setting is "SONY."
To avoid unwanted access to the
projector from other computers,
changing the community name of the
factory default is recommended.
-Port No.: Input the server port of PJ
Talk. The factory default setting is
"53484."
-Timeout: Input the time (seconds) until
PJ Talk communication is terminated
in case it is disconnected. The factory
default setting is "30."
-Host Address: Input the IP address that
the PJ Talk server is allowed to
receive. If no IP address is input,
receiving commands will be allowed
from any IP address. From the
moment the IP address is input, access
will be allowed only from that input IP
address.
For security reasons, it is
recommended to input an IP address to
restrict access.
5
Click on [PJ Link] to display the PJ
Link page.
PJ Link button
Start PJ Link Service: Set PJ Link to
enabled or disabled. Items for PJ Link
are enabled only when this function is
enabled.
-Requires Authentication: Set the
authentication for PJ Link to enabled
or disabled.
-Password: Input the authentication
password for PJ Link. For the factory
default password, refer to the PJ Link
specifications.
6
Click on [PJ Control API] to display
the PJ Control API page.
PJ Control API button
47
Advertisement
Table of Contents
