Table of Contents
Advertisement
Setting items
Description
*1
Light Settings
Dynamic
On/Off: Brightness is adjusted automatically according to image content. Dark
Control
images are projected with brightness adjusted, leading to energy-saving. Bright
images are projected brightly, without adjusting brightness.
Light
Adjusts brightness of the light source.
Output
Standard: The image becomes brighter, and power consumption becomes
Mode
higher.
Middle: Power consumption becomes lower; however, the image will be
darker.
Extended: The images becomes dark but extended projection is enabled.
Custom: You can adjust brightness as prefer.
Constant
On/Off: Available when Light Output Mode is set to "Standard" or "Middle."
Brightness
Brightness is constant at about 80% of light output of each mode.
*3
Expert Setting
Reality
Adjusts the detail and noise processing of images. (Super-resolution function)
On: Adjusts the settings of "Reality Creation."
Creation
Resolution: When you increase the setting value, the texture and detail of the
image become sharper.
Noise Filtering: When you increase the setting value, the noise (picture
roughness) becomes less prominent.
Test: On/Off: Switches "On" and "Off" at a certain frequency to check the
effect of "Reality Creation."
Off: The "Reality Creation" function is not applied.
Contrast
Corrects the level of bright and dark parts automatically to optimize contrast
according to a scene. Increases image sharpness and makes image dynamic.
Enhancer
High/Middle/Low: You can adjust the contrast enhancer.
Off: The "Contrast Enhancer" function is not applied.
Gamma
2.2: Equivalent to a 2.2 gamma curve.
Mode
2.4: Equivalent to a 2.4 gamma curve.
Gamma 3: Applies a gamma curve that prioritizes the brightness to suit use in
a relatively bright environment.
Gamma 4: Enhances black and white contrast to suit use in a relatively dark
environment.
DICOM GSDF Sim.
Standard Display Function (GSDF) of the Digital Imaging and
Communications in Medicine (DICOM) standards.
Color
Converts the color space.
Space
Custom 1: Produces images with vivid colors.
Custom 2: Produces images with muted colors.
Custom 3: Reproduces image colors true to the original image source.
You can select R/G/B for the selected color space and adjust the R/G/B
chromaticity points in the x and y directions in the CIExy chromaticity diagram
respectively.
Color Select: Select the color to adjust from "Red," "Green," and "Blue."
Cyan - Red (x): Adjusts the chromaticity point of the selected color toward
cyan-red (x).
Magenta - Green (y): Adjusts the chromaticity point of the selected color
toward magenta-green (y).
*4
*5
: Gamma setting is in accordance with the Grayscale
26
Advertisement
Table of Contents
