Table of Contents
Advertisement
Start PJ Control API Service: Set PJ
Control API to enabled or disabled.
-Requires Authentication: Set the
authentication for PJ Control API to
enabled or disabled.
-PSK(Pre-Shared Key): Input the PSK
(Pre-Shared Key) for authentication.
Only 8 to 63 alphanumeric characters
can be input.
7
Click on [Service] to display the
Service page.
The system service function is set.
Service button
Start DDDP Service: Set DDDP to
enabled or disabled. For details, refer
to the DDDP specifications from
AMX Corporation.
Crestron Control: For details, refer to
the product catalogues, etc., from
Crestron Corporation.
-IP Address: Input the Crestron system
server.
-IP ID(HEX): Input the IP ID(HEX) for
the CIP protocol.
-Port No.: Input the port number for the
CIP protocol server.
Resetting the network settings
Reset the network settings to their factory
defaults.
Reset button
Reset: Reset all Web browser settings to
their factory defaults.
48
Reset
Advertisement
Table of Contents
