Table of Contents
Advertisement
Answering system
Answering system settings
Use the answering system menu of a system handset or the telephone base
to set up the announcement message, turn on or off the answering system
or message alert tone, activate call screening, or change the number of rings,
remote access code or message recording time.
If you turn off the answering system and you change any setting in the
answering system setup menu, the answering system automatically turns on
again.
Announcement
Your outgoing announcement plays when calls are answered by the
answering system.
The telephone has a default outgoing announcement, "Hello, please leave a
message after the tone." You can use this announcement, or record your own.
You can record an announcement up to 90 seconds. The system does not
record any announcement shorter than two seconds.
To play your current outgoing announcement:
MENU
1. Press
2. Press
or
CID
SELECT.
3. Press
SELECT
4. Press
or
CID
SELECT.
in idle mode.
to highlight Answering sys, then press
DIR
again to select Announcement.
to highlight Play annc, then press
DIR
141
ANSWERING SYS
Announcement
Delete al l old
Record memo
BACK
SELECT
ANNOUNCEMENT
Record annc
Play annc
Reset annc
BACK
SELECT
Playing
announcement...
RECORD
STOP
Advertisement
Table of Contents
