Table of Contents
Advertisement
Answering system
Message playback
On the telephone base, if you have new messages, the telephone plays only
the new messages in chronological order. If there are no new messages, the
telephone plays back all messages in chronological order.
On the handset, if you have both new and old messages, you can play either
new or old messages. The caller ID information displays on the handset screen
when you play messages and you can call back the caller.
When playback begins, the handset screen displays the message status, caller
ID information, and time and date of the message recorded. You hear the total
number of messages followed by the day and time of the message. After the
last message, the telephone announces, "End of messages." and the screen
displays End of messages.
To listen to messages at the telephone base:
/PLAY/
Press
f
If you have either new or old messages, the messages play automatically.
If you have both new and old messages, press
f
new msgs or Play old msgs, then press
To listen to messages on a cordless handset:
MENU
1. Press
SELECT
2. Press
messages, the messages play automatically.
If you have both new and old messages, press
f
new msgs or Play old msgs, then press SELECT.
When the handset or the telephone base is playing a message, its screen shows
[2]-Call info and the caller's name or number. If the caller's information is
unavailable, the handset or the telephone base shows No caller info.
The system announces the number of messages, then begins playback. The
message sequence is shown on screen. If there are no recorded messages, the
screen shows No messages and you hear, "You have no messages."
on the telephone base to listen to the messages.
STOP
in idle mode.
to select Play messages. If you have either new or old
SELECT
154
to select Play
or
CID
DIR
or
/PLAY/
STOP
to select Play
or
CID
DIR
.
Advertisement
Table of Contents
