Table of Contents
Advertisement
Multiple handset use
Intercom
Using the telephone base:
MENU
1. Press
2. Press
or
CID
If you have one handset and no other registered device, the telephone
f
base displays Calling HANDSET 1.
If you have other registered device(s) or more than one handset, the
f
telephone base displays INTERCOM TO: and a list of registered devices.
Š Press
Š
press SELECT.
-OR-
Š Use the dialing keys to enter a specific device number (1-9 for handset
Š
1-9, TONE followed by 0-2 for handset 10-12, or # for a single headset/
speakerphone, # followed by 1 or 2 for headset/speakerphone 1 or 2, or
TONE followed by # for all devices).
The telephone base displays Calling HANDSET X, Calling headset or Calling
all. The destination handset(s) rings and shows Base 0 is calling or Base
0 is calling all (HANDSET represents the handset name, X represents the
handset number).
Notes:
You can cancel the intercom call before it is answered by pressing
f
END
or CANCEL on the telephone base.
If you are calling all handsets, only the first handset to pick up can answer the intercom call.
f
If the destination device does not answer the intercom call within 100 seconds, or if the device is in use, on a call, or
f
out of range, the initiating device displays No answer. Try again. and returns to idle mode.
To temporarily silence the intercom ringer, press MUTE,
f
press MUTE, CANCEL or MUTE on the telephone base.
You can only use one pair of devices at a time to make intercom calls.
f
in idle mode.
to highlight Intercom, then press
DIR
or
to highlight a destination device or all devices, then
CID
DIR
OFF/
CANCEL
OFF/CANCEL or MUTE/
72
SELECT
.
on the handset, or by pressing
on the handset, or
DELETE
Advertisement
Table of Contents
