Glossary Of Terms - AT&T TL96477 Complete User's Manual

Bluetooth

Glossary of terms

Below are some terms used in this user's manual to help you become familiar with
using your Bluetooth devices and your new AT&T telephone system.
Active device slots - the Device list has two active slots for two cell phones, or
one cell phone and one headset. When a device in the list is active it will have a
D1: or D2: in front of the device name. In order to use a Bluetooth device on a
call, it must be in an active slot and be connected.
Bluetooth cell phone - refers to a mobile Bluetooth enabled cellular telephone.
CELL line - the telephone line associated with your cell phone service. On your
TL96457/TL96477/TL96487/TL96497/TL96547 handset or telephone base,
press CELL 1 or CELL 2 to use the cell line.
Connected - when you pair a Bluetooth device to the TL96457/TL96477/
TL96487/TL96497/TL96547, it is placed in an active slot and automatically
connected. When a device is connected, a 1 and/or 2 will display after on the
handset and telephone base screen. Also, the CELL 1 and/or CELL 2/HEADSET
light on the telephone base will be on. If a device loses its connection to the
telephone base, it must be reconnected before you can use the device with the
telephone system.
Disconnected - when a device is disconnected, 1 and/or 2 displays
after on the handset and telephone base screen. The CELL 1 and/or
CELL 2/HEADSET light on the telephone base is/are off.
Discoverable mode - before a Bluetooth enabled device can be paired, it
must be set to this mode. When pairing your cell phone, the telephone base is
in this mode. When pairing a headset, the headset must be set to this mode.
Depending on the manufacturer, this mode is sometimes referred to as Find Me
or Visibility.
HOME line - your conventional telephone land line. On your TL96457/TL96477/
TL96487/TL96497/TL96547, press HOME/ HOME
on the handset or
FLASH
on the telephone base to use the home line.
Paired devices - Bluetooth enabled devices (cell phone or headset) that
have shared registration information with the telephone base. A total of four
Bluetooth enabled devices can be paired with the telephone base. However,
only two paired devices can be connected to the base at a time.
Pairing - sometimes refers to as bonding. The process of sharing registration
information between two Bluetooth enabled devices. Your Bluetooth enabled
cell phone or headset must first be paired to the telephone base in order to
use it with this cordless phone system.
PIN - by default, the PIN is 0000 for the telephone base and for most Bluetooth
devices. PIN information must be exchanged between Bluetooth devices before
they can be used. This is also known as a Passkey or Passcode.
22