Table of Contents
Advertisement
Answering system
Answering system settings
Voice guide to set up answering system
This feature is an alternative way for you to do the basic setup of the answering
system. You can follow the voice guide to record your own announcement, set
the number of rings, and set the message alert tone.
To use the voice guide feature:
MENU
1. Press
2. Press
or
CID
then press SELECT.
3. Press
or
CID
SELECT. You hear a voice prompt, "This voice guide will
assist you with the basic setup of your answering system."
4. Set up your answering system by inputting designated
numbers, as instructed in the voice guide.
Notes:
You can press
OFF
f
base to quit the voice guide at any time.
If the system does not receive any input, it will play an alert message. If there is still no
f
input, it will announce "Sorry, I still have not received any input. If you want to restart
the voice guide, please enter the menu and select Voice guide under Answering system.
Good bye."
After a power outage, the system prompts you to set the date and time, and Smart call
f
blocker. After these settings are done or skipped, the system then prompts if you want
to set up the answering system via voice guide. Press
in idle mode.
to highlight Answering sys,
DIR
to highlight Voice guide, then press
DIR
/CANCEL on the handset or press CANCEL on the telephone
YES
to start the setup.
144
ANSWERING SYS
Record memo
Answer On/Off
Voice guide
BACK
SELECT
Setting up
Answering
system
ANSWERING SYS
Record memo
Answer On/Off
Voice guide
BACK
SELECT
Setting up
Answering
system
Advertisement
Table of Contents
