Reset Your Controller To Factory Defaults; Controller Default Settings - TRENDnet TEW-WLC100P User Manual

TRENDnet User's Guide

Reset your controller to factory defaults

Management > Maintenance
You may want to reset your controller to factory defaults if you are encountering
difficulties with your controller and have attempted all other troubleshooting. Before
you reset your controller to defaults, if possible, you should backup your controller
configuration first, see "Backup and restore your controller configuration
page 15.
There are two methods that can be used to reset your controller to factory defaults.
 Reset Button – Located on the rear panel of your controller, see
Hardware Features" on page 2. Use this method if you are encountering
difficulties with accessing your controller management page.
OR
 Controller Management Page
1. Log into your controller management page (see
management page" on page 10).
2. Click on Management and click on Maintenance.
3. In the Backup/Restore System Configuration section, click Restore to factory default.
© Copyright 2017 TRENDnet. All Rights Reserved.
settings" on
"Product
"Access you wireless controller

Controller default settings

Administrator User Name
Administrator Password
Controller IP Address
Controller Subnet Mask
Controller Default Gateway
Primary DNS Server
TEW-WLC100P
admin
admin
192.168.10.200
255.255.255.0
192.168.10.1
192.168.10.1
17