Table of Contents
Advertisement
TRENDnet User's Guide
Q2: I configured my computer's network adapter with a static IP address, how do I
reconfigure my computer's network adapter to default settings and obtain an IP
address automatically using DHCP?
Note: Please note that although the following procedures are provided to follow for your
operating system network adapter settings to be used as general guidelines, however, it
is strongly recommended that you consult your computer or operating system
manufacturer directly for assistance on the proper procedure for configuring network
settings. If you are experiencing difficulties, please contact your computer or operating
system manufacturer for assistance.
Windows 2000/XP/Vista/7/8/8.1/10
a. On your keyboard, press Windows Logo + R keys simultaneously to bring up
the Run dialog box.
b. In the dialog box, type ncpa.cpl to bring up the Network Connections
window.
c. Right-click the Local Area Connection or Ethernet icon, click Properties, and
double-click Internet Protocol Version 4 (TCP/IPv4).
d. Then click Obtain an IP address automatically and Obtain DNS server
address automatically.
e. Click OK on both TCP/IPv4 Properties and Local Area Connection Properties
windows.
MAC OS X
a. From the Apple drop-down list, select System Preferences.
b. Click the Network icon.
c. From the Location drop-down list, select Automatic.
d. Select and view your Ethernet connection.
In MAC OS 10.4, from the Show drop-down list, select Built-in
Ethernet and select the TCP/IP tab.
In MAC OS 10.5 and above, in the left column, select Ethernet.
e. Configure TCP/IP to use a static IP.
From the Configure IPv4 or Configure drop-down list, select Using
DHCP and click the Apply or Apply Now button.
f. You may be prompted to restart your computer to apply the new IP address
settings.
© Copyright 2017 TRENDnet. All Rights Reserved.
Q3: I typed
http://192.168.10.200
in my Internet Browser Address Bar, but an error
message says "The page cannot be displayed." How can I access the wireless controller
management page?
Answer:
a. Double check all physical cable and port connections.
b. Make sure the POWER/SYSTEM LED on the wireless controller front panel is
on.
c. Make sure your computer's network adapter is configured with a static IP
address. (Refer to Q1 for instructions on assigning a static IP address).
d. Make sure your computer is connected to one of the Ethernet ports 1-5.
e. Since the switch default IP address is 192.168.10.200, make sure there are
no other network devices assigned an IP address of 192.168.10.200
Note: After checking all of the recommended items above, please attempt to
access the wireless controller management page again.
Q4: I changed the IP address of the wireless controller, but I forgot it. How do I reset
my wireless controller to factory default?
Answer:
Using a paper clip, push and hold the reset button on the rear panel of the wireless
controller and release after 15 seconds. The default IP address of the switch is
192.168.10.200. The default user name and password is "admin".
Q5: How do I find the current IP address of my computer's network adapter?
Answer:
Note: Please note that although the following procedures are provided to follow for your
operating system network adapter settings to be used as general guidelines, however, it
is strongly recommended that you consult your computer or operating system
manufacturer directly for assistance on the proper procedure for configuring network
settings. If you are experiencing difficulties, please contact your computer or operating
system manufacturer for assistance.
TEW-WLC100P
47
Advertisement
Table of Contents
