Table of Contents
Advertisement
Sequence Set
This submenu allows you to change the length of time a camera is displayed while the
SEQUENCE (SEQ) feature is enabled. When in SEQUENCE mode, the observation monitor cy-
cles through available cameras in the sequence shown below.
NOTE: If a camera is set to 0 SEC, it will be skipped
in the AUTO SEQUENCING. Any channel without
an attached camera will be skipped automatically.
1. QUAD-A - Shows cameras 1 - 4 in QUAD screen
mode. To change the length of display time, press
the
and
buttons to highlight, and press the OK
button to select the function. Press the
buttons to change the number of display seconds,
and press the OK button to accept the change
2. CH1 - CH4 - Shows cameras 1 - 4 in FULL
SCREEN screen mode. To change the length of
display time, press the and
and press the OK button to select the function.
Press the
and
of display seconds, and press the OK button to
accept the change
3. QUAD-B - Shows cameras 1 - 4 in QUAD screen
mode. To change the length of display time, press
the
and
buttons to highlight, and press the OK
button to select the function. Press the
buttons to change the number of display seconds,
and press the OK button to accept the change
4. CH5 - CH8 - Shows cameras 1 - 4 in FULL
SCREEN screen mode. To change the length of
display time, press the and
and press the OK button to select the function.
Press the
and
of display seconds, and press the OK button to
accept the change
5. RETURN - Return to the MAIN MENU. Navigate
by pressing the
and
press the OK button to select
6. EXIT - Return to the camera view. Navigate by
pressing the
and
press the OK button to select
buttons to highlight,
buttons to change the number
buttons to highlight,
buttons to change the number
buttons to highlight, and
buttons to highlight, and
and
QUAD-A
CH1
CH2
CH3
CH4
QUAD-B
CH5
CH6
CH7
CH8
RETURN
EXIT
and
Sequence Set
[SEQUENCE SET]
:
03 SEC
:
03 SEC
:
03 SEC
:
03 SEC
:
03 SEC
:
03 SEC
:
03 SEC
:
03 SEC
:
03 SEC
:
03 SEC
:
[
]
:
[
]
23
Advertisement
Table of Contents
