Demo Mode Function; Ordering Accessories Saeco - Saeco Incanto HD8911/47 Manual

Problem
The AquaClean filter is
installed, but the
descaling message
appears.
The AquaClean filter does
not fit.

Demo mode function

Ordering accessories Saeco

Typenumber
CA6700
CA6903
HD5061
CA6704
Technical specifications
Cause
You have not activated the
AquaClean filter in the machine
menu.
You need to remove air from the
filter.
There is still water in the water tank.
You are trying to install another filter
than the AquaClean filter.
The rubber o-ring is not attached to
the AquaClean filter.
The machine is equipped with a demo mode function.
1 Press and hold the standby button for more than 8 seconds to enter the
demo mode function.
2 To exit the demo mode, turn the machine OFF and ON using the main
switch at the back of the machine.
To clean and descale the machine, only use the Saeco maintenance
products. These products can be purchased in the Philips online shop (if
available in your country) at www.shop.philips.com/service, from your local
reseller or from the authorized service centers.
Ordering maintenance products:
The manufacturer reserves the right to improve the technical specifications
of the product. All the preset quantities are approximate.
Solution
First descale the machine and
then install a new AquaClean filter.
This will reset the filter counter to
0/8. Always confirm filter
activation in the machine menu,
also after filter replacement.
Let air bubbles come out of the
filter.
Empty the water tank before you
install the filter.
Only the AquaClean filter fits into
the machine.
Check the packaging for the o-ring
and attach it to the AquaClean
filter.
Product
Descaling solution
AquaClean filter
Brew group grease
Degreasing tablets
English
29