Replacing The Intenza+ Water Filter - Saeco Incanto HD8911/47 Manual

2 Remove the filter from its packaging and immerse it in cold water with
the opening pointing upwards. Press the sides of the filter gently to let
out the air bubbles.
3 Turn the knob of the filter to the setting that corresponds to the water
hardness of the area you live in.
a Very soft water/soft water
b Hard water (default)
c Very hard water
Note: You can test the water hardness with a water hardness test strip.
4 Place the filter in the empty water tank. Press it down until it cannot
move any further.
5 Fill the water tank with fresh water up to the MAX indication and slide it
into the machine.
6 Press the MENU button and scroll to INTENZA+ FILTER. Press the OK
button to confirm.
7 Select ON on the display, press the OK button to confirm activation.
8 Dispense 2 cups of hot water (0.5l) to complete the activation. Discard
ON
this water.
OFF

Replacing the Intenza+ water filter

Note: Replace the Intenza+ water filter as soon as the filter icon appears on
the display.
1 Take out the water filter and replace it by a new Intenza+ water filter.
Follow the instructions (see 'Intenza+ water filter') on how to prepare the
water filter for use.
2 Press the MENU button and scroll to INTENZA+ FILTER. Press the OK
button to confirm.
3 Select RESET on the display, press the OK button to confirm reactivation.
4 Dispense 2 cups of hot water (0.5 l) to complete the activation of the new
ON
filter. Discard this water.
OFF
RESET
English
11