Saeco Incanto HD8911/47 Manual page 22

English
22
START
CALC
CLEAN
REMOVE
FILTER
2
1
CALC
CLEAN
Note: Do not remove the brew group during the descaling
procedure. Warning: Do not drink the descaling solution or the
water dispensed during the descaling procedure.
1 Remove the drip tray and the coffee grounds container, empty and clean
them and put them back into place.
2 Remove the external part of the classic milk frother.
3 Place a large container (1.5 l) under the coffee dispensing spout and the
classic milk frother.
4 When the display shows 'START CALC CLEAN', press the OK button to
start the descaling procedure. Remove the hot water dispensing spout if
present.
-
The following icon on the display reminds you to remove the Intenza+
water filter.
Note: You can press ESC to skip descaling. If you want to start the
descaling procedure later, press the MENU button, select MENU and
scroll to select DESCALING. Press OK to confirm.
5 Remove the water tank. If present, remove the Intenza+ water filter from
the water tank and replace it with the original small white filter.
6 Pour the descaling solution in the water tank. Fill the water tank with
fresh water up to the CALC CLEAN level indication. Place the water tank
back in the machine. Press the OK button to confirm.
-
The first phase of the descaling procedure starts. The machine starts
dispensing the descaling solution at intervals.
-
The display shows the descaling icon, the phase indication and the
duration. This first phase takes 20 minutes.
7 Let the machine dispense the descaling solution until the water tank is
empty.
8 Remove the water tank and rinse it.
9 Fill the water tank with fresh water up to the CALC CLEAN level
indication. Place the water tank back in the machine and press OK.
10 Remove and empty the container and place it back under the coffee
dispensing spout. Press OK to confirm.
11 The second phase of the descaling procedure starts, which is the rinsing
cycle. This phase takes 3 minutes. The display shows the rinsing icon and
the duration of the phase.
Note: If the water tank is not filled up to the CALC CLEAN level, the
machine may require another rinsing cycle.