Kyocera 1102R73AS0 Operation Manual page 289

Setup and Registration (System Menu) > System Menu
Item
IPP over SSL
Protocol Setting
Port Number
Available Network
*2
(Wi-Fi Direct)
Available Network (Wi-Fi)
Available Network
(Wired Network)
Raw Port
Protocol Setting
Available Network
*2
(Wi-Fi Direct)
Available Network (Wi-Fi)
Available Network
(Wired Network)
-
Select whether or not to use IPP over SSL.
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. the default certificate is the
self-certificate of the machine.
Command Center RX User Guide
Set the IPP over SSL default Port Number. The default port number is 443.
Value: 1-32767
NOTE
This function is displayed when [Protocol Setting] is set to [On].
Set whether to enable this function for each network.
Value: Disable, Enable
*2
NOTE
This function is displayed when [Protocol Setting] is set to [On].
-
Select whether to receive documents using Raw Port.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
*2
NOTE
This function is displayed when [Protocol Setting] is set to [On].
Description
*1, *3
8-33
*1
*1