Kyocera 1102R73AS0 Operation Manual page 86

Installing and Setting up the Machine > Quick Setup Wizard
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login]. For this,
you need to login with administrator privileges. The factory default login user name and login password are set as
shown below.
Login User Name: 2600
Login Password: 2600
1
2
3
Display the screen.
[System Menu/Counter] key > [Quick Setup Wizard]
Select a function.
Configure the settings.
Start the wizard. Follow the instructions on the screen to configure settings.
NOTE
If you experience difficulty configuring the settings, refer to the following:
Help Screen (page 2-20)
Control
End
Previous
Skip
Next
Back
Complete
Exits the wizard. Settings configured so far are applied.
Returns to the previous item.
Advances to the next item without setting the current item.
Advances to the next screen.
Returns to the previous screen.
Register the settings and exit the wizard.
2-36
Description