Kyocera 1102R73AS0 Operation Manual page 365

Troubleshooting > Troubleshooting
Message
*1
Send Error.
System error.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-40)
T
Message
The cover is open.
The device cannot be
connected because
allowed connections
would be exceeded.
The phone receiver is off
the hook.
The manufacturer
assumes no
responsibility for
damage caused by a
non-genuine toner.
The slit glass requires
cleaning.
This memory is not
formatted.
This will be formatted.
Are you sure?
This user account is
locked out.
Checkpoints
—
—
Checkpoints
Is there any cover which is open?
Are the toner containers installed
correctly? Is a toner container out
of place?
—
—
Is the installed toner container our
own brand?
—
Is the removable memory formatted
by this machine?
—
10-24
Corrective Actions
An error has occurred during
transmission. The job is canceled.
Select [End].
Refer to Responding to Send Error
for the error code and corrective
actions.
System error has occurred. Follow
the instructions on the screen.
Corrective Actions
Close the cover indicated on the
screen.
Make sure all four colors of toner
containers are installed correctly,
and close the right cover.
Release the connection of an
unused mobile device, or set an
auto break time on the machine to
break connections to mobile
devices.
Put down the receiver.
We will not be liable for any damage
caused by the use of third party
supplies in this machine. If you want
to continue, select [Next].
Clean the slit glass.
Perform [Format] on this machine.
Contact administrator.
Job is canceled. Select [End].
Reference
Page
page 10-26
—
Reference
Page
—
page 10-5
—
—
—
page 10-3
page 7-11
—