Automatic Adjustments Are Not Performed Correctly - Epson V11H735140 User Manual

Problem Solving
Check
Is only one projector being used?

Automatic adjustments are not performed correctly

Check
Have at least 20 minutes passed since the power was turned on?
Do the Lens Type and the lens being used match?
Is the cover of the built-in camera clean?
Is an analog signal being input?
Has the image been corrected using Geometry Correction?
Is the brightness of the surroundings appropriate?
Is the blending width 15 to 45%?
Check if the following item is set to dark.
s Extended - Multi-Projection - Screen Matching - Brightness Settings
Auto adjustment does not work correctly until the temperature of the projector is stable. Perform auto adjustment 20
minutes after turning on the projector or canceling A/V Mute.
When using the following lenses, check that the Lens Type and the lens being used match. If a different lens is selected,
auto adjustment does not work correctly.
ELPLS04, ELPLU02, ELPLW04, ELPLM06, ELPLM07
s Extended - Operation - Advanced - Lens Type
Make sure that the cover of the built-in camera is clean. Clean the cover if it is dirty.
When inputting an analog signal, the color and brightness of the input image changes, and the results of adjustment may
not be applied correctly.
Auto adjustment may not work for images corrected using Geometry Correction. Set Geometry Correction to Off or
reduce the correction range.
s Settings - Geometry Correction p.131
If a powerful spotlight or natural light shines into the area during auto adjustment, the brightness of the surroundings
changes and auto adjustment does not operate correctly. Make sure the brightness of the surroundings does not change.
If the blending width in Edge Blending is 15% or less, or 45% or more, the Screen Matching function may not operate
correctly. Check the blending width.
s Extended - Multi-Projection - Edge Blending
Remedy
p.133
Remedy
p.133
p.133
176