Contents Introduction to the Updated Firmware ELPLM15 Projection Distance ..................... 16 ELPLM15 Polarizer (ELPPL01) Installation Distance............ 16 ELPLX02 Support ........................... 17 Features of Firmware Version 2.00 ..........5 ELPLX02 Lens Shift Range ....................17 Updates to Supported Optional Accessories (Version 2.00) ........... 5 ELPLX02 Keystone Correction Range................
Page 3
Contents Details of User Operation Change (Version 2.10)......36 Focus Adjustment While Displaying the Lens Calibration Message......36 Details of User Operation Change (Version 3.00) ......37 Point Correction Number Change ..................37 Operating Conditions for Light Source Calibration ............37 Appendix Notices....................
Introduction to the Updated Firmware Epson periodically provides firmware updates to enhance your projector features and to address issues of performance. Refer to these sections to learn more about the updated features within each firmware version. g g Related Links •...
Features of Firmware Version 2.00 Refer to these sections for a summary of the updated features of projector Updates to Projector Status Information (Version firmware version 2.00. 2.00) g g Related Links • "Updates to Supported Optional Accessories (Version 2.00)" The following projector status information changes in firmware version 2.00.
Version 2.10 firmware supports the following software in addition to the existing optional software available for your projector. • Epson Projector Professional Tool Version 1.2 See Epson Professional Projector Tool Operation Guide for more details. Updates to Projector Menus (Version 2.10) The following projector menus change in firmware version 2.10.
Features of Firmware Version 2.14 Refer to the section for a summary of the updated features of projector firmware version 2.14. g g Related Links • "Updates to Supported Optional Accessory (Version 2.14)" Updates to Supported Optional Accessory (Version 2.14) Version 2.14 firmware supports the following optional accessory in addition to the existing optional accessories.
Updates to Art-Net Channel Definitions (Version 3.00) • Epson Projector Professional Tool Version 1.31 See Epson Professional Projector Tool Operation Guide for more details. The following Art-Net channel definitions change in firmware version 3.00. • Channel 14 Freeze is added.
Page 9
Features of Firmware Version 3.00 • "Operating Conditions for Light Source Calibration" p.37...
Details of Updated Firmware Check these sections for the updated details of firmware. g g Related Links • "Details of Updated Optional Accessories (Version 2.00)" p.11 • "Details of Updated Optional Accessories (Version 2.14)" p.19 • "Details of Updated Projector Menus (Version 2.00)" p.20 •...
Details of Updated Optional Accessories (Version 2.00) Refer to these sections for more details about newly supported optional EB‑ ‑ L1505U/EB‑ ‑ L1500U accessories. g g Related Links • "ELPLW08 Support" p.11 • "ELPLM15 Support" p.13 • "ELPLX02 Support" p.17 ELPLW08 Support You can use lens unit ELPLW08 with your projector when you update the firmware to version 2.00.
Details of Updated Optional Accessories (Version 2.00) EB‑ ‑ L1505U/EB‑ ‑ L1500U Center of the lens Projected image when the lens position is moved to the home position Vertical lens shift: Home Vertical lens shift: Top Maximum motion range: V × 67% position (R/L) (R/L) Horizontal direction at maximum value: V ×...
ELPLW08 Projection Distance You can calculate the projection distance using the following formulas. You can also use the projection distance calculator to automatically calculate various distances for you. https://epson.com/ EB‑ ‑ L1505U/EB‑ ‑ L1500U • Screen aspect ratio: 16:10 or 16:9 Screen •...
Details of Updated Optional Accessories (Version 2.00) Concave surface Convex surface Vertical lens shift: Home Vertical lens shift: Top position (R/L) (R/L) Horizontally curved 0.33 0.35 surface (convex) Vertically curved surface 0.15 0.17 (concave) Vertically curved surface 0.18 0.22 (convex) ELPLM15 Corner Wall Correction Range Screen Center point of the circle created by the arc of the curved surface...
You can also use the projection distance calculator to automatically Shortest distance from the projection lens to the polarizer calculate various distances for you. Longest distance from the projection lens to the polarizer https://epson.com/ Polarizer (ELPPL01) EB‑ ‑ L1505U/EB‑ ‑ L1500U EB‑ ‑ L1505U/EB‑ ‑ L1500U •...
Details of Updated Optional Accessories (Version 2.00) EB‑ ‑ L1405U/EB‑ ‑ L1300U/EB‑ ‑ L1200U/EB‑ ‑ L1105U/EB‑ ‑ L1100U/EB‑ ‑ L1000U You cannot shift the lens to both the horizontal and vertical maximum values. Projector Resolution WUXGA ELPLX02 Support You can use lens unit ELPLX02 with your projector when you update the firmware to version 2.00 (EB‑L1505U/EB‑L1500U) .
You can also use the projection distance calculator to automatically ELPLX02 Corner Wall Correction Range calculate various distances for you. https://epson.com/ The following table shows the maximum angle (α) within which the projector can move during corner wall correction. • Screen aspect ratio: 16:10 or 16:9 •...
ELPLU03S because all the description of ELPLU03 is also applicable to ELPLU03S. The maximum vertical lens shift range is approximately 32% and the maximum horizontal lens shift range is approximately 10% with the ELPLU03S lens. However, some signals may not be displayed correctly even within the range (EB‑L1505U/EB-L1500U).
Details of Updated Projector Menus (Version 2.00) Refer to these sections for details about projector menu changes. • When the brightness has been automatically dimmed due to a high temperature environment. g g Related Links • Run Periodically: When you select On, Light Source Calibration is •...
Details of Updated Projector Menus (Version 2.10) Refer to these sections for details about projector menu changes. EDID Menu g g Related Links The EDID setting is added to the Signal menu. • "Cursor Position Memory of Projector Menus" p.21 •...
Details of Updated Projector Menus (Version 2.10) Previous Settings Menu (Version 1.00) New Reset Menu (Version 2.10) Top menu Sub menu Items or setting Top menu Sub menu Items or setting values values Reset Reset All Memories Settings Geometry Curved Surface Correct Shape Light Source Calibration Run Now...
Details of Updated Projector Menus (Version 2.10) Previous Setting Value (Version 1.00 with sRGB or DICOM SIM color Color of Cross-hatching Test Pattern modes) You can select the color of the cross-hatching test pattern from red, green and blue in addition to black. New Setting Value (Version 2.10 with all color modes)
Details of Updated Projector Menus (Version 3.00) Refer to these sections for details about projector menu changes. New Setting Items (Version 3.00) Brightness Settings, Black Level (Color Adjustment only), Blend Curve g g Related Links • "Camera Function Error Details" p.24 •...
Details of Updated Projector Menus (Version 3.00) Previous Settings Menu (Version 2.10) If you have already made corrections using Point Correction, you may not be able to change Interpolation if the amount of correction is too Top menu Sub menu Items or setting values large.
Details of Updated Projector Menus (Version 3.00) New Settings Menu (Version 3.00) Top menu Sub menu Items or setting values Extended Operation Lens Calibration Start, History Brightness Level You can select 10% as the minimum setting for the light source brightness in Settings >...
Details of Updated Projector Status Information (Version 2.00) Refer to these sections for details about changes to projector status Category Item Status information. Laser Warning g g Related Links • "Temp Error FE and Temp Warning FE" p.27 New Projector Status Information (System) (Version 2.00) Category Item Status...
Page 28
Details of Updated Projector Status Information (Version 2.00) • Temp Warning FE: Temperature warning due to overheating of the laser.
Details of Updated Art-Net Channel Definitions (Version 3.00) See these tables for details about changes to the Art-Net channels. Chanel Function Operation Parameter Default Operation Content Previous Art-Net Channel Definitions (Version 2.10) Horizonta (+) lens Movemen 0 - 31 Performs l lens shift adjustmen t - Large...
Page 30
Details of Updated Art-Net Channel Definitions (Version 3.00) Chanel Function Operation Parameter Default Operation Chanel Function Operation Parameter Default Operation Content Content Electronic (+) lens Movemen 0 - 31 Performs Electronic (+) lens Movemen 0 - 31 Performs zoom adjustmen t - Large electronic distortion...
Page 31
Details of Updated Art-Net Channel Definitions (Version 3.00) Chanel Function Operation Parameter Default Operation Chanel Function Operation Parameter Default Operation Content Content Power Power off 0 - 63 Turns the Shutter Shutter Closed 0 - 63 Closes/op control projector control ens the Non-operational 64 - 191...
Page 32
Details of Updated Art-Net Channel Definitions (Version 3.00) Chanel Function Operation Parameter Default Operation Chanel Function Operation Parameter Default Operation Content Content Horizonta (+) lens Movemen 0 - 31 Performs Electronic (+) lens Movemen 0 - 31 Performs l lens shift adjustmen t - Large horizontal...
Page 33
Details of Updated Art-Net Channel Definitions (Version 3.00) Chanel Function Operation Parameter Default Operation Chanel Function Operation Parameter Default Operation Content Content Electronic (+) lens Movemen 0 - 31 Performs Power Power off 0 - 63 Turns the distortion adjustmen t - Large electronic control...
Page 34
Details of Updated Art-Net Channel Definitions (Version 3.00) Chanel Function Operation Parameter Default Operation Chanel Function Operation Parameter Default Operation Content Content Fade-in 0.0s 0 - 15 Fade-in Light 0% - 100% 0 - 255 Controls time Source the light 0.5s 16 - 31 setting...
Details of User Operation Change (Version 2.00) Refer to these sections for details on changes to user operations. g g Related Links • "On-Screen Display Operation" p.35 On-Screen Display Operation You can turn the on-screen display on or off with the following operations. Previous On-Screen Display Operation (Version 1.00) You can turn the on-screen display on or off by pressing the [User] button that you assign the On-Screen Display feature on the remote control.
Details of User Operation Change (Version 2.10) Refer to these sections for details on changes to user operations. g g Related Links • "Focus Adjustment While Displaying the Lens Calibration Message" p.36 Focus Adjustment While Displaying the Lens Calibration Message You can adjust the focus while displaying the lens calibration message.
Details of User Operation Change (Version 3.00) Refer to these sections for details on changes to user operations. (Even if you set higher values, the calibration may not start depending on the surrounding temperature.) g g Related Links • "Point Correction Number Change" p.37 •...
Notices Check these sections for important notices. Other product names used herein are also for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and g g Related Links all rights in those marks. • "Copyright Notice"...