Maintaining The Printer; Adjusting The Speaker Volume - Lexmark MB2650 User Manual

Maintaining the printer

Maintaining the printer
Warning—Potential Damage: Failure to maintain optimum printer performance, or to replace parts and
supplies, may cause damage to your printer.

Adjusting the speaker volume

Adjusting the default internal speaker volume
1
From the control panel, navigate to:
Settings > Device > Preferences > Audio Feedback
2
Adjust the volume.
Notes:
•
If Quiet Mode is enabled, then audible alerts are turned off. This setting also slows the printer
performance.
•
The volume resets to the default value after the session is logged out or when the printer wakes from
Sleep or Hibernate mode.
Adjusting the default headphone volume
1
From the control panel, navigate to:
Settings > Device > Accessibility
2
Adjust the headphone volume.
Note: The volume resets to the default value after the session is logged out or when the printer wakes
from Sleep or Hibernate mode.
Configuring the fax speaker settings
1
From the home screen, touch Settings > Fax > Analog Fax Setup > Speaker Settings.
2
Do the following:
•
Set the Speaker Mode to Always On.
•
Set the Speaker Volume to High.
•
Activate the Ringer Volume.
143