Setting Status List; Filter Sign Reset; Version; Display Sensor Values - Fujitsu UTY-RNRYZ5 Operation Manual

Erase the Error History
(1) Touch the [Erase All] on the "Error History" screen.
(2) A verification screen is displayed. When the [Yes] is
touched after the history is cleared, the display returns
to the "Error History" screen.
(1)
Error History
No. Date Time Address
1 2015/ 8/ 1 11:00 AM 002-01
2 2015/ 7/30 2:53 AM 002-02
3 2015/ 7/25 8:53 AM 002-02
4 2015/ 7/22 11:00 AM 002-01
5 2015/ 7/22 11:00 AM 002-01
6 2015/ 7/21 11:00 AM 002-01
Next
Back
Page
3-10-2 Setting Status List
(1) Touch the [Setting Status List]
on the "Maintenance" screen.
(2) "Setting Status List" screen is displayed. The screen
has 5 pages which are switched by touching the [Next
Page] or [Previous Page].
(Items that indoor unit does not support are not dis-
played.)

Setting Status List

On Timer
– Operation Start Time
Off Timer
– Operation Stop Time
Auto Off Timer
– Operation Stop Time
– Time Range
Back
Setting Status List
Set Temp. Range Setting
– Auto [18.0°c – 30.0°c]
– Cool/Dry [18.0°c – 30.0°c]
– Heat [10.0°c – 30.0°c]
Date Format [Day/Month/Year]
Time Format [12:00–11:59AM/PM]
Previous
Back
Page
Setting Status List
R.C. Master/Slave Setting
Backlight Setting
– Automatic Off Time
– Brightness
Contrast
Previous
Back
Page
When the [Back] is touched, the display returns to the
"Maintenance" screen.

3-10-3 Filter Sign Reset

(1) Touch the [Filter Sign Reset] on the "Maintenance"
screen.
After the data transmission screen is displayed, the
"Filter Sign Reset" screen is displayed.
(2) When the [OK] is touched, the indoor unit filter sign
goes off and the display returns to the "Maintenance"
screen.
(1)
Maintenance
Setting
Error History
Status List
Filter Sign

Version

Reset
Back
En-23
(2)
Page 1/ 2 Error History
Code
141
143
143
Delete entire error history?
141
141
141
Erase
No
All
Maintenance
Error History
Filter Sign
Reset
Back
Setting Status List
Page 1/ 5
[Disable] Weekly Timer
[0.5hr] Set Temp. Auto Return
[Disable] – Cool
[0.5hr] – Heat
[Disable]
[30min.]
[ – ]
Next Previous
Back
Page Page
Setting Status List
Page 3/ 5
Summer Time Setting
[Disable]
Temp. Unit Setting
R.C. Sensor Setting
Display Item Setting
– Filter Sign
– Room Temp.
Next Previous
Back
Page
Page
Page 5/ 5
[Master]
[Enable]
[30s]
[2]
[3]
(2)
Filter Sign Reset
Page 1/ 3
The filter sign will be reset. OK?
Next
Cancel
Page
3-10-4 Version
(1) Touch the [Version] on the "Maintenance" screen.
(2) "Version" screen is displayed.
When the [Back] is touched, the display returns to the
"Maintenance" screen.
(1)
Maintenance
Error History
Yes
Back
3-10-5 Display Sensor Values
Page 1/ 3
(1) Touch the [Display Sensor
Setting
Values] on the "Maintenance"
Status List
screen.
Version
Next
Page
(2) "Unit selection" screen is dis-
played.
Select the air conditioner
which you want to monitor. If
4 or more air conditioners are
registered, this screen has
multiple pages. To switch the
Page 2/ 5
[Disable]
page, touch the [Next Page] or
[Disable]
[60min. / 28.0°c]
[Previous Page].
[60min. / 23.0°c]
NOTE
Next
Page
Some indoor units do not support this function. If you
Page 4/ 5
touch such an indoor unit, "No Function" message
[Disable]
appears. Touch [Close] to return the "Unit selection"
[°C]
[Not Used]
screen.
[Visible]
[Invisible]
Next
(3) Select the category about which you want to monitor.
Page
(4) If you select [Sensor ID], input the ID of the monitoring
item on the next screen.
(3)
Advanced Selection
Indoor Unit
Operating Time
Information on the selected
category is displayed. When
the screen has multiple pages,
they can be switched by
touching the [Next Page] or
[Previous Page].
When the [End] is touched, the display returns to the
"Advanced Selection" screen.
OK
Page 1/ 3
Setting
Status List
Filter Sign
Version
Reset
Next
Page
Outdoor Unit
Sensor ID
Back
(2)
Version
E000V00P00L00
Back
Maintenance
Page 3/ 3
Display Sensor Installer Password
Values Change
Initialization
Previous
Back
Page
Unit Selection
Page 1/ 2
No. System–Unit / Ref.–In.
1 200–1 / 01–01
2 200–2 / 01–02
3 200–3 / 01–03
Next
Back
Page
(4)
Sensor ID
-
0 0 0 0 1 1
0 1 2 3 4
CL
5 6 7 8 9
Cancel OK
Indoor Unit
Page 1/ 3
Item [Value]
[18.0 ℃]
Return Air Temp.
[18.0 ℃]
Room Temp.
[18.0 ℃]
Heat ex. inlet temp.
[18.0 ℃]
Heat ex. middle temp.
[18.0 ℃]
Heat ex. outlet temp.
[18.0 ℃]
Discharge temp.
Next
End
Page